Electronic Engineer / Technologist
Position CLOSED
The successful candidate will be responsible for:
Assisting with the production and testing of assemblies (Manufacturing of cables, harnesses, power supplies, PCB assemblies and instrumentation)Performing service, repair and calibration of instruments. Traveling, including internationally, to operate, trouble-shoot and repair instruments. Developing and maintaining process documentation and quality control procedures/ Assist with performing schematic design entry and PCB layouts. Assist with calibration instruments and processing of acquired imagery. Data processing in support of our systems.
Qualifications for
the position:
BSc. Electrical Engineering or Diploma in Electronics Engineering Technology (or equiv.)Proficiency in soldering electronics assemblies (through-hole and surface mount.Experience with electronic lab equipment including oscilloscopes, multi-meters, signal generators, logic analyzers, etc.Strong written and oral communication skillsStrong desire for international travel for extended periods (up to 3 week rotations, multiple times per year)Hold or be eligible to hold a valid PassportPass a Police Security Clearance ApplicationWilling to install and operate equipment in small aircraftEligibility for registration with APEGA / ASETMust be able to pass Controlled Goods Program requirements.
Electrical / Electronics Engineer
Position OPEN
The successful candidate will be responsible for:
PCB schematic design and layouts, as well as VHDL designAssist with complete instrument designs, developing and maintaining process documentation and quality control procedures, assist with production / service QA processes, assist with calibrating instruments and processing of acquired imagery. Data processing in support of our systems, traveling, including internationally, trouble-shoot and assist clients, assist in other parts of the business where appropriate.
Qualifications for
the position:
BSc. Electrical EngineeringHardware design experience with FPGAs and VHDL design experience.Strong aptitude for reading schematics and diagnosing / troubleshooting electronic assemblies, systems and software.Understanding and ability to develop communication software that uses TCP/IP, Ethernet, RS-232 and USB hardware and protocolsExperience with electronic lab equipment including oscilloscopes, multi-meters, signal generators, logic analyzers, etc.Strong written and oral communication skillsProficiency in soldering electronics assemblies (through-hole and surface mount).Hold or be eligible to hold a valid passport.Must be able to pass a Police Security Clearance application.Must be able to pass Controlled Goods Program requirements.Eligibility for registration with APEGA
Geomatics / Data Imaging Scientist / Analyst
Position CLOSED
The successful candidate will be responsible for:
Calibration and radiometric processing algorithm development (IDL)Calibration and processing GUI software development (IDL), processing/analysis of imagery data in support of imaging systems. Sensor characterization and calibration (hyperspectral and broadband imagers). Traveling internationally to install / operate airborne imagers in small planes to acquire data. Up to 25% of time spent on operations / training / support missions internationally. QA of data and instruments. General support for other ITRES’s divisions (service, marketing, production, etc.)
Qualifications for
the position:
Bachelor of Science or higher education levelStrong written and oral communication skills.Strong technical writing skills.Strong desire for international travel for extended periods (up to 3 week rotations, multiple times per year).Experience with electronic lab equipment including oscilloscopes, multi-meters, signal generators, logic analyzers, etc.Pass a Security Clearance ApplicationArcGIS Experience, Linux knowledge, C / Python knowledge of Higher Level Math / Physics / Optics / Statistics and Geomatics Knowledge
Software Engineer / Developer – Instrument Control
Position CLOSED
The successful candidate will be responsible for:
General support for other ITRES divisions (service, marketing, production, etc.)Developing and integrating software for ITRES hyperspectral and thermal imagers, multi-instrument command and control software, remote sensing data analysis tools, responsible for full life-cycle development (plan, design, verify, certify) of desktop and embedded software for ITRES’ instruments, typically done in C/C++
Qualifications for
the position:
At least 5 years of experience in software development in Windows and Linux environmentStrong programming background in C/C++, creating software for real-time systems, hands-on coding on CPU and DSPExperience supporting all stages of the development cycleUnderstanding and ability to develop communication software that uses TCP/IP, Ethernet, RS-232 and USB hardware and protocolsFamiliarity with software configuration management tools, version control, defect tracking tools, and peer reviewStrong written and oral communication skillsBachelor’s degree in Electrical or Electronics Engineering, or Computer SciencePass a security Clearance Application
Desired skills:
Java / PythonComputer vision and machine learningKnowledge of Avionics SensorsGeomatics knowledge
Apply
Quality Management Specialist
Position CLOSED
The successful candidate will be responsible for:
Maintain, update and improve quality documentation for ITRES’ Quality Management SystemPerform periodic internal audits. Provide periodic training to departments on QA standards and procedures. Report compliance to the President of the company. Assist other departments within ITRES as needed.
Qualifications for
the position:
Immediate availabilityMinimum Bachelor’s Degree in an engineering or science discipline (ie. engineering, computer science) is preferred, however, other backgrounds will be seriously considered if the candidate has related work experience.Demonstrated experience with ISO9001 2015 (preferably AS9100) is mandatory.Must be able to work flexible hours in a fast-paced environment.Strong working knowledge of basic word processing and spreadsheet software.Strong written and oral communication skillsMust have strong oral and written communication skills.Pass a security Clearance Application
Inventory Specialist
Position CLOSED
The successful candidate will be responsible for:
Assist and document all incoming and outgoing deliveries.Organizing, managing existing part numbers as well as creating new part numbers, generate shortage reports, regular inventory counts, assist other departments within ITRES as needed, actively participate in ITRES’ Quality Management System, secure and negotiate quotes from suppliers.
Qualifications for
the position:
Immediate availabilityExperience with shipping and handling logistics.Must be able to work flexible hours in a fast-paced team environment and to be able to work independently.Proficient with Microsoft Windows operating systems, strong working knowledge of basic word processing and spreadsheet software.Must have strong oral and written communication skills and work well in a team environment.Strong written and oral communication skillsExperience with current inventory systems such as Fishbowl or equivalent.Previous related work experience desired.Pass a security Clearance Application
Mechanical Designer / Technologist
Position OPEN
The successful candidate will be responsible for:
Perform mechanical design and drafting.Able to work shop tools, to provide custom mechanical solutions as needed such as brackets and mounts for aircraft. Fulfill work orders for production (manufacturing of instruments, cables and harnesses). Develop and maintain process documentation, reports and quality control procedures. Build bill of materials and assembly drawings. Work with suppliers and vendors. Generate bid request, sales, manufacturing orders etc. using the inventory system (Fishbowl inventory). Perform quality assurance on machined and sheet metal parts. Assist other departments in the company as needed. Perform service, repair and calibration of instruments. Packing and shipping.
Qualifications for
the position:
Diploma in Mechanical Engineering / Engineering Design and Drafting Technology, BSc. in Mechanical Engineering or equivalent. Professional attitude and able to work well with others.Able to work flexible hours in a fast-paced team environment.Experienced in 2D and 3D CAD Software (SoldWorks preferred) and competent in standard drafting practices (GDT)Knowledge of some optomechanical design and electronics would be an asset.Strong written and oral communication skillsFamiliar with standard shop equipment.Working knowledge of Microsoft Word and ExcelAble to travel internationally.Pass a security Clearance Application
Optical Engineer
Position CLOSED
The successful candidate will be responsible for:
Spectrograph and Lens Design, Opto-mechanical experienceProficiency in the use of Optical Design software (Zemax). Familiarity with various image sensor technologies (ie: CCD, CMOS, MCT Imagers, etc.) Strong analytical and mathematical skills. Proficient with IDL, MATLAB or a similar language. Knowledge in optics and electronics lab environments (clean rooms, etc.) Resolution and sensitivity measurements (MRTD, MRC, NETD, MTF, etc.) Knowledge of tolerance and performance modeling techniques. Experience in Imaging, Radiometry
Qualifications for
the position:
MSc in Physics Optical Engineering DegreeStrong written and oral communication skillsStrong technical writing skillsHold or be eligible to hold a valid Canadian PassportWilling to travel, especially to suppliers world widePass a security Clearance Application
Client Technical Support / Remote Sensing Operator
Position CLOSED
The successful candidate will be responsible for:
Respond to client technical inquiries (hardware, software and data processing)Perform system troubleshooting. Provide sensor operations and data processing training. Process imagery for internal Quality Assurance and project related tasks. Operate remote sensing instruments in aircraft to acquire imagery for project-related activities. Perform basic system maintenance, calibration and repairs. Operate ground instruments in the field. Assist other departments within ITRES as needed. Actively participate in ITRES’ Quality Management System.
Qualifications for
the position:
Degree or Dipoloma in Geography or Earth Sciences or equivalentMust be able to work flexible hours in a fast-paced team environment.Must be able to work independently and able to travel and do field work.Willing and capable to fly in small survey aircraft and platforms.Have a good background in remote sensing, GIS and geomatics-related technologies.Proficient in Microsoft Windows operating systems (Linux would be an asset)Strong working knowledge of basic work processing and spreadsheet softwareWorking knowledge of image processing software such as ENVIStrong working knowledge of basic work processing and spreadsheet softwareMust have strong oral and written communication skillsExperience with computer systems and electronics would be an assetPrevious related work experience desired. Some international travel may be necessary.Pass a security clearance application.